8) Clear Four Post Lift:-
- In Clear Four Post Lift Free Standing four post lifts are often engineered with large lifting screws at each corner, driven electro-mechanically via the control panel or handheld pendant. These lifting screws ensure the platform remains level as they move in tandem with one another.
- A four post lift is a mechanical lifting system that relies on 4 posts to lift a piece of equipment, or a vehicle to a specified height in order to perform work on a product. 4 post lifts can make life much easier for a mechanic. These lifts make it simpler to lift the vehicle off the ground and will enable you to get to those impossible to reach areas.
- Doing work under a vehicle involves a lot of risks and four post lifts are designed to prevent accidents and injuries. While there are a number of jacks available in the market, they definitely are not a substitute for a 4 post lift.They have safety features that prevent accidents and injury. Four post lifts are also sturdier alternatives to two-post lifts and provide quick “drive on – Drive off” vehicle loading.
- A 4 post lift is compact and is best for all passenger vehicles. A hydraulic jack beam comes along with a capacity of 2 tonnes. This lift has an electrical air control operation system. It has a capacity of 4 tonnes and a lifting height of 1750 mm. It features a mechanical self-lock, air safety release and provides an additional feature of a manual release pump for lowering lift during a power cut.
- Four post lifts are user-friendly and have a wider range of clientele. But are especially popular among hobbyists; home garages and any size shop. This is because these lifts don’t need floor anchors. But, as with everything, there are flaws in four-post lifts. The most obvious is that if you plan to use this type of lift for wheel service, you will also want to invest in sliding bridge jacks to lift said wheels off the runway.
8.1) Who Buys Clear Four Post Lifts?
- The drive-on four post car lift comes in several styles that are design specific to improve the user’s certain needs. One style that has gained in recent popularity is built for the car enthusiasts and collector car market.
- It has its own style that allows for servicing and storing cars on top and below the runways. This allows the enthusiast to use his shop space more efficiently without the expense of adding on to his shop.
- Not only do they provide more storage space, but just like the professional service centers, jacks can be added to these lifts to provide for wheels free service. The enthusiasts drive-on lifts also come in a variety of sizes that can allow enough height under the runways for a full size truck or SUV if needed.
8.2) Other features found on the four post enthusiasts lift are:
- No need to be bolted to the concrete on models that are certified to be “free standing”.
- Caster kits make the lift portable to move to another bay.
- Drip trays that collect leaks and prevent the car on bottom from being dripped on.
- Jack trays that allow a scissor jack or bottle jack to be placed for lifting the wheels free.
- Hydraulic jacks designed to slide between the runways for lifting the front or rear end wheels free.
- Operates on standard 110 volt power.
- Best application and drive-on clearance for extremely low vehicles.
8.3) Clear Four Post Enthusiasts Lift
Another popular style of drive-on lift is the commercial grade 14,000 lb. capacity lift. The dimensional range of this style is popular with independent repair shops as well as car dealerships because it can handle a wide range of vehicles without changing any setup. Runways are typically bolted into place at a width that accommodates narrow vehicles and are also wide enough to handle wider tread widths. This makes setup time minimal which leads to a more productive work bay.
8.4)Clear Four Post Lifts for Wheel Alignments
Another popular application for the commercial grade 4-post lift is wheel alignment service. The cable style lift has independent locking ladders in each column that allow for precise leveling at each corner which is critical for accurately measuring wheel alignment angles.
Once levelled, these lifts can simply be raised to the preferred height and set into the nearest locked position for a precise level condition. The alignment versions of these lifts can be equipped with front turntables and rear slip plates to allow complete four wheel alignment service. Add two roller jacks and both the front and rear can be raised to access all four wheels. Some models have an “open-front”, meaning the front crossrail has been removed to allow easy access under the front end without having the beam in your way.
8.5) Wheel-Free Roller Jacks
On a wheel contact lift, the wheels are supported unless a wheel-free roller jack is used. These jacks, which are air powered and/or hydraulic, are used to raise either the front or rear of the car for wheels free work. After the vehicle is raised, the jack is lowered onto a mechanical safety latch. When using one of these jacks, keep hands clear and be sure to extend each of the lift arms an equal amount to avoid uneven loading. Be sure that a wheels free jack is lowered all of the way before driving into or out of the lift.
8.6) How to Install a 2 Post Car Lift or a Clear Four Post Lift
When purchasing either a 2 post or 4 post lift, it’s important to consider the concrete, clearance, and space requirements before installation. You should also consider where to place a lift for accessible use.
When your lift is delivered, it’s going to be heavy and will most likely be unloaded with a forklift or truck-mounted crane so once it’s placed on the ground, you won’t be easily picking it up and moving it around. It’ll help to have dollies or some kind of rolling table to help maneuver boxes once they’re unloaded. Your very first step will be to read the product manual for installation instructions.
- After you’ve read the manual, you’ll start with assembly. Follow directions carefully, and only tighten bolts by hand until your component is properly aligned. Make sure you’re assembling the lift close to where you’ll be installing it. Once your components are put together, it’ll be very difficult to move.
- Next, you’ll need to make sure you have all cables, locks, and hydraulic systems as stated in the manual. Install these pieces while your lift is still on ground.
- Once the lift is mostly assembled, make sure the floor is marked so when you get around to raising the lift using adequate lifting means (such as a forklift), you don’t end up being way off the installation mark.
- Use caution when drilling concrete holes and ensure you have the right tools and protection to prevent any accidents. Drill the necessary depth and make sure you’re using the recommended wedge anchors and hardware to secure your lift to the concrete.
- Lastly, you might need a qualified electrician to finish installation by giving power to your lift. Follow the final installation steps as recommended by your product manual and your lift should be ready to go.
8.7) Specifications and Maintenance of Clear Four Post Car Lift
The specifications of a car lift vary depending on the design and intended use. Here are some common specifications:
- Weight Capacity
- The maximum weight that the lift can handle is the four-post car lift’s capacity. A lift with a higher weight capacity is required for larger and heavier vehicles.
- Rise Height
- The rise height is the maximum height the lift can reach to elevate a vehicle. The rise height is essential for tasks that require working overhead or for storing tall vehicles.
- Length and Width
- The length and width of the four-post lifts are determined by the lift’s size. A wider lift offers more space for larger vehicles, while a longer lift provides more room for extended vehicles.
- Lifting Mechanism
- A hydraulic pump or electric motor are commonly used lifting mechanisms on four-post car lifts. The lifting mechanism affects the lift’s speed, noise level, and maintenance requirements.
- Safety Features
- Safety features include emergency stop buttons, safety locks, and overload protection systems. These features help prevent accidents and injuries during vehicle lifting and lowering.
Here are some common maintenance practices for four-post car lifts:
- Regular Inspection
- A routine inspection of the lifts and all components is essential for identifying potential problems. Check for wear and tear, loose parts, or damages during the inspection.
- Lubrication
- Four-post car lifts require regular lubrication of moving parts, such as bearings and chains, to minimize friction and wear. Use the recommended lubricants and adhere to the manufacturer’s instructions for the right lubrication intervals.
- Cleaning
- The lifts require regular cleaning to get rid of debris, dirt, and spills. Pay special attention to the lift’s moving parts and the area surrounding the lift to maintain a clean work environment.
- Load Management
- Four-post car lifts should not be loaded beyond their weight capacity. Overloading the lift can cause damages and increase the risk of accidents. Distribute the load evenly to improve the lift’s stability and performance.
- Tightening and Adjustment
- Regularly check all bolts, screws, and other fasteners on the lift and tighten them as needed. Adjust the lift’s height and level to ensure proper operation and safety.
8.8) Product Description of Clear Four Post Lift :-
The Clear Four-Post Lift is a versatile and reliable solution for automotive professionals and enthusiasts seeking efficient vehicle lifting and storage. Engineered for strength, durability, and ease of use, this lift is perfect for servicing, inspecting, or securely storing vehicles.
8.9) How to choose a Clear four-post car lift
When choosing a four-post car lift, there are several important factors to consider:
- Capacity: Four-post lifts have a higher lifting capacity than two-post lifts. The capacity ranges from 6,000 to 20,000 pounds. When choosing a lift, consider the weight of the vehicles that will be lifted. The capacity should exceed the vehicle’s weight.
- Space: Four-post lifts require more space than two-post lifts. The lift needs about 5 feet of overhead clearance. Consider the available space before purchasing a four-post lift.
- Installation: Four-post lifts are easier to install than two-post lifts. The lifts don’t require anchoring to the floor. The lifts can be installed on a level concrete floor. Consider the time and cost of installing the lift.
- Cost: Four-post lifts are more expensive than two-post lifts. The cost of the lift varies based on the capacity, features, and brand. Consider the budget when purchasing a four-post lift.
- Accessibility: Four-post lifts provide better accessibility to the vehicle. The vehicle can be accessed from all four sides. The lifts are ideal for garages that require better accessibility.
- Maintenance: Four-post lifts require less maintenance than two-post lifts. The lifts have fewer moving parts. The lifts require regular cleaning and inspection.